The TA Series tools use a combination of torque for snugging and angle for final installation. Each of these functions should be calibrated at least annually. A quick way to verify snug torque is to use one of our Digital Torque Meters. The DTM can be easily attached to the TA Series Wrenches and [...]
The TA Series tools used with TNA® bolts will fall within current clearance guideline found in AISC Manual Table 7. Stagger and Clearance drawings are available for download.
There isn’t a fastener available that can meet 100% of the clearance issues found on jobsite every day. The spline of the TNA® bolt is within the detailing clearance recommended in the AISC Design manual, Table 7. In short, the TnA™ bolt should not interfere with bolt installation if AISC design criteria is followed for [...]
Embeds from this vendor are blocked and replaced with a placeholder until consent is given.
Embeds from this vendor are blocked and replaced with a placeholder until consent is given.
Embeds from this vendor are blocked and replaced with a placeholder until consent is given.
Enables Google Analytics to store data about your visit, such as pages viewed, time spent, and interactions, to help us understand and improve website performance.
